This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== BentoIO CMX1 Raspberry PI CM5 IO Carrier Board (Version 1) ====== ====Key Features==== * Form Factor: Compact 85 × 85 mm footprint; low-profile design with only 11 mm height * GPIO: Standard 40-pin Raspberry Pi-compatible GPIO header * Mounting: Mounting holes follow the Raspberry Pi standard ====Interfaces & Connectivity==== USB: * 2× USB 3.0 Type-A ports * 2× internal USB 2.0 headers (PH2.0) Video Output: * HDMI output via HDMI/LAN daughterboard * 1× MIPI DSI FPC connectors (22-pin, 0.5 mm pitch) Network: * Gigabit Ethernet via HDMI/LAN daughterboard PCIe: * M.2 M-Key PCIe slot (2230/2242 size) Power Supply: * USB-C input (+5 V) ====Additional Connections==== * RTC battery connector * 4-pin fan connector * Power button * Flash mode switch * microSD slot for CM5 Lite modules (without eMMC)